The post SE720D Case With Padded Divider appeared first on SeaGator Cases.
]]>Take your photo equipment on the go without worry!
The SE720DO includes all the benefits of a standard Seahorse SE720 and adds a padded divider and mesh lid organizer to further increase your case’s protection
- Standard safety latches
- Waterproof – MIL-STD-810F and IEC 60529: IP67
Impact Resistant – MIL-STD-3010C - Meets the airline industry’s ATA-300 specification
- Automatic pressure equalization system
- Padlock holes (Fits standard-size Masterlocks)
- Buoyancy: 55 lb
- Weight Capacity: 70 lb
- Optional Keyed Locking Latches available in chrome metal or non-corrosive plastic
- Velcro padded dividers
- Zippered 4 pocket mesh lid organizer
Interior Dimensions: 18.1 x 12.9 x 6.3 in
Exterior Dimensions: 20.1 x 15.6 x 7.6 in
Weight Empty/Foam: 7.75/8.48 lb
Buoyancy: 55 lb
Weight Capacity: 70 lb
Divider Features
Heavy-duty removable and repositionable padded dividers allow for any custom configuration needed to protect and organize your valuable camera equipment. Compartments provide 360 protection. The 9701 divider is specifically designed to fit securely in the Seahorse SE720 protective case.
Lid Organizer Features
Made of waterproof Nylon, features individual mesh pockets to protect and keep your gear organized. Designed specifically for the SE720, it is installed directly into the lid with screws.
The post SE720D Case With Padded Divider appeared first on SeaGator Cases.
]]>The post SE720DO Case With Padded Divider appeared first on SeaGator Cases.
]]>The SE720DO includes all the benefits of a standard Seahorse SE720 and adds a padded divider and mesh lid organizer to further increase your case’s protection
FEATURES
- Made in the U.S.A.
- Lifetime Guarantee*: SEAHORSE CASES are guaranteed against defects in materials and craftsmanship for the life of the case. Cases that have been modified are not covered by this guarantee
- Automatic Pressure Purge System: Seahorse’s Automatic Pressure Purge System guarantees a perfect seal by incorporating its own O-Ring under one of the latches. You will never forget to set the valve since it automatically activates when closing the case. Pressure is released as you open the latch.
- Molded-In Padlock Hole: Each case has one molded-in padlock hole to secure your valuables. The padlock hole will accept “TSA” and most standard padlocks.
- Accuform Foam: Optional multiple-layer pre-scored cubed foam. Accuform Foam in Seahorse cases consists of a layer of egg crate foam in the lid, a thick cubed foam center, and a 1/2″ thick high-density shock-absorbing foam bottom layer.
- Waterproof Panel Kit: The Seahorse Panel Kits are used when specific equipment needs to be kept protected even when the case is open. These two plates are made of .063″ brushed aluminum and include screws, one perimeter gasket, and O-Rings for the screws to waterproof the bottom portion of your case.
- Keyed Locks: Available with latches with keyed chrome metal locks or plastic non-corrosive locks.
- Metal locks are made entirely of chromed steel and keyed.
- Plastic locks are molded of ABS Resin, one of the toughest co-polymers available. Keys are also made of Plastic.
- Standard safety latches
- Impact Resistant – MIL-STD-3010C
- Meets the airline industry’s ATA-300 specification
- Automatic pressure equalization system
- Padlock holes (Fits standard-size Masterlocks)
- Buoyancy: 55 lb
- Weight Capacity: 70 lb
- Optional Keyed Locking Latches available in chrome metal or non-corrosive plastic
- Velcro padded dividers
- Zippered 4 pocket mesh lid organizer
Divider Features
Heavy-duty removable and repositionable padded dividers allow for any custom configuration needed to protect and organize your valuable camera equipment. Compartments provide 360 protection. The 9701 divider is specifically designed to fit securely in the Seahorse SE720 protective case.
Lid Organizer Features
Made of waterproof Nylon, features individual mesh pockets to protect and keep your gear organized. Designed specifically for the SE720, it is installed directly into the lid with screws.
The post SE720DO Case With Padded Divider appeared first on SeaGator Cases.
]]>The post SE720CC Computer Case appeared first on SeaGator Cases.
]]>
-
- Holds laptops up to 11 5/8″ x 14 1/8″ x 2″ (with a 16.1″ screen). Laptops rest securely on a fitted, shock absorbing bottom, with room underneath for AC cords, earphones, USB drives, CDs, etc.
- The bottom is deeper than the SE710CC
- The lid organizer allows space for file folders, tablets, instruction books, calculators, pens, pencils, etc.
- Includes latches with keyed chrome metal locks
- A padded, detachable comfort carry strap is also included
- Waterproof – MIL-STD-810F and IEC 60529: IP67
- Impact Resistant – MIL-STD-3010C
- Meets the airline industry’s ATA-300 specification
- Automatic pressure equalization system
- Padlock holes (Fits standard-size Masterlocks?)
- Buoyancy: 55 lb
- Weight Capacity: 70 lb
Outside Dimensions
Length Width Height
20.1 in 15.5 in 7.6 in
Case Weight Shipping Weight
12.2 lb 14 lb
Laptop Dimensions
Length Width Height
11 5/8″ 14 1/8″ 2″
The post SE720CC Computer Case appeared first on SeaGator Cases.
]]>